Télécharger Imprimer la page

Parkside Performance PPHSA 40-Li A1 Traduction Des Instructions D'origine page 27

Taille-haies sans fi l 40 v

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
result­in­injuries­and­risk­of­fire.
c) Keep the unused battery away
from paper clips, coins, keys,
nails, screws and other small
metal objects, which could cause
bridging of the contacts. A short
circuit between the battery contacts
may­cause­burns­or­fire.
d) If used incorrectly, liquid may
leak from the battery. Avoid
contact with this. In the event of
accidental contact, rinse off with
water.­If­the­liquid­gets­into­eyes,­seek­
medical­assistance.­Leaking­battery­fluid­
may cause skin irritations or burns.
e) Do not use damaged or altered
batteries. Damaged or altered batter-
ies­can­be­unpredictable­and­lead­to­
fire,­explosion­or­risk­of­injury.
f) Do not expose batteries to fire
or elevated temperatures. Fire or
temperatures­over­130 °C­can­cause­
an­explosion.
g) Follow all instructions for charg-
ing and never charge the bat-
tery or the battery-powered tool
outside the temperature range
stated in the operating instruc-
tions. Incorrect­charging­or­charging­
outside­the­permitted­temperature­
range may destroy the battery and in-
crease­the­risk­of­fire.
6) SERVICE
a) Have your power tool serviced
by a qualified repair person us-
ing only identical replacement
parts. This will ensure that the safety
of­the­power­tool­is­maintained.
b) Never repair damaged batter-
ies. All­battery­repairs­should­be­car-
ried out by the manufacturer or author-
ised customer service centres only.
Attention! Observe the de-
tailed safety information and
notes on charging and proper
use as shown in the instruction
manual for your battery and
charger from the Parkside X
20 V Team series. A detailed
description of the charging
process and further informa-
tion can be found in the sepa-
rate operating instructions.
Safety instructions for hedge
trimmers
a) Keep all body parts away from
the blade. Do not attempt to re-
move clippings or to hold onto
material to be cut when the
blades are running. The blades con-
tinue to move after turning off the switch.
A moment of inattention when using the
trimmer can result in serious injuries.
b) Hold the hedge trimmer by the
handgrip when the blade is at
a standstill and make sure you
do not press the switch. Carrying
the hedge trimmer correctly reduces the
risk­of­inadvertent­operation­and­being­
injured by the blade as a result.
c) Always place the protective cov-
er onto the blades while trans-
porting or storing the hedge
trimmer.Careful handling of the
hedge trimmer reduces the risk of injury
from the blade.
d) Ensure that all switches are
turned off and the battery is
removed or switched off before
removing jammed clippings or
maintaining the machine. Unex-
pected­operation­of­the­hedge­trimmer­
when removing jammed material can
lead to serious injuries.
GB
IE
27

Publicité

loading