Dimplex 6908760100 Mode D'emploi page 9

Fireplace Installation
CAUTION: High temperature,
keep electrical cords, drapery,
and other furnishings at least
3 feet (0.9m) from the front of
the heater and away from the
side and rear.
3. The fireplace must be
mounted at a minimum of
two (2) points, one of which
must be on a wall stud.
Some available hanging
combinations are A-G, B-F,
B-G, C-G, A-F, A-E, A-D and
Figure 2
6 in (152 mm)
MINIMUM
40 in (1020 mm)
RECOMMENDED
Figure 3
A B C D E F
Figure 4
Screw
D-G. (Figure 3).
!
NOTE: Wall anchors must
be installed in the appropriate
wall locations to fasten the wall
bracket to drywall. (Figure 4)
4. Hold the wall hanging bracket
on the wall and mark the
location of ONE (1) of the
securing holes.
5. Place the bubble level onto
the top of the wall hanging
bracket.
6. Adjust the wall hanging
bracket so the bubble on the
level is centered between the
two black lines.
7. Mark the two (2) screw
locations, on the wall,
ensuring that the wall bracket
stays level.
8. Install the supplied wall
G anchors on the drywall
marked locations by placing
Wall anchor
Wall
bracket
9