Publicité
Les langues disponibles
Les langues disponibles
Problem
The light
ring around
the on/off
button flashes
slowly.
The CALC
light flashes.
The light ring
around the
on/off button
continues to
flash rapidly.
Troubleshooting
This chapter summarises the most common
problems you could encounter with the machine.
If you are unable to solve the problem with the
information below, contact the Consumer Care
Centre in your country.
Solution
You have used the SENSEO
altitude higher than 2200 metres above sea level. This
has caused the water in the machine to start boiling
before it has reached the required temperature,
which prevents the machine from functioning
properly. Switch off the machine and no longer use it
at altitudes higher than 2200 metres above sea level.
You have pressed the 1-cup button and the 2-cup
button at the same time. This started the descaling
cycle. If you did not intend to start the descaling
cycle, simply press the on/off button to switch off the
machine. If you did intend to start the descaling cycle,
do not interrupt this cycle but let the appliance
operate until the water reservoir is empty.
Make sure that:
the water reservoir is placed properly;
there is enough water in the water reservoir (i.e.
above the q MIN level if you want to brew 1 cup);
the ambient temperature is not lower than 10°C.
If it is, the machine does not function properly.
EnglisH
coffee machine at an
®
25
Publicité
