Publicité
Les langues disponibles
Les langues disponibles
EnglisH
22
2
Fill the water reservoir with the descaling
mixture. Then put the water reservoir back
onto the coffee machine.
3
Press the on/off button 3.
, The machine is ready for use when the light ring
lights up continuously.
4
Place the 1-cup pod holder q with a used
coffee pod in it in the coffee machine. Close
the lid and make sure it is properly locked.
It is not possible to descale the machine
when the lid is not properly closed and the lid
lever is not locked. In this case, the indicator
light flashes intermittently.
Note: Always put a used coffee pod in the pod holder
when you descale the machine. This pod serves as a
'filter' to prevent the sieve or hole in the pod holder
from getting clogged with scale residue.
5
Put a bowl with a capacity of at least 1500ml
under the spout to collect the descaling
mixture.
6
Press the 1-cup button q and the 2-cup button
qq briefly at the same time to start the
descaling cycle.
, The CALC light starts flashing to indicate that
the descaling cycle has started.
Publicité
