Publicité
Les langues disponibles
Les langues disponibles
EnglisH
12
5
Press the on/off button 3.
, The light ring around the on/off button lights
up to indicate that you have to flush the
machine.
6
Press the 1-cup button q and the 2-cup button
qq briefly at the same time to start the
flushing cycle.
Never interrupt the flushing cycle halfway. If you
do, the boiler does not fill itself properly.
, The light ring around the on/off button starts
flashing to indicate that the flushing cycle has
started. The flushing cycle takes approx. 1.5 to
2.5 minutes.
, During the flushing cycle, the boiler fills itself
with water from the water reservoir and cold
water comes out of the coffee spout. During the
flushing cycle, the machine produces more noise
than during a regular brewing cycle.
, When all the water in the water reservoir has
been used up, the flushing cycle is finished and
the machine switches off.
7
Clean the coffee spout, the coffee collector
and the pod holders with hot water and some
washing-up liquid or in the dishwasher. Clean
the water reservoir thoroughly in hot water, if
necessary with some washing-up liquid.
Now your Philips SENSEO
for use.
coffee machine is ready
®
Publicité
