Alarm Settings; Setting An Alarm; Stop The Alarm; System Settings - Albrecht Audio DR 50 B Guide D'utilisation

8. Alarm Settings

8.1. Setting an Alarm

1. Press the Alarm button
2. Select between Alarm 1 and Alarm 2 and confirm with OK.
Now you can set the following alarm options:
• Alarm: Select between On or Off.
• Frequency: choose between Daily, Once, Weekdays or Weekends.
• Wake Up Time: here you can set the time at which the alarm starts. In case you selected Once
in the Frequency settings you also have to specify the date.
• Source: Buzzer
• Duration: specifies the duration (in seconds) for which the alarm sounds.
Once the alarm is set correctly the alarm symbol is shown in the display.

8.2. Stop the alarm

Once the alarm started, you can turn it off by pressing the
any other button to start the snooze alarm. It will start an alarm again after 9 minutes. ertönen. The
adapter shows a countdown timer with the remaining time until the next alarm.

9. System Settings

Press MENU and then select System settings.

9.1. Time and Date

The first time you listen to DAB radio the device will automatically update the time and date. If you
do wish to set the time and date manually, follow the steps below.
Seelct MENU / System settings / Time/Date. You can now choose:
1. manually change the Time/Date
2. Auto Update the time
3. Set 12/24 Hour time format
4. Select Date Format between TT-MM-JJJJ / MM-TT-JJJJ / JJJJ-MM-TT
5. choose a Clock Style (in Standby): Normal, Big, Classic, Modern
on the remote control.
Standby or Alarm button. Press
21