Before You Start; Power Connection; Basic Functions; Adjusting The Volume - Albrecht Audio DR 50 B Guide D'utilisation

3. Before you start

3.1. Power connection

1. Connect the power supply into the socket on the back of the radio and place the cable antenna
to a free space to obtain the maximum signal strength.
2. Connect the 3.5mm audio cable with the AUX socket of the Albrecht DR 50 B and the other end
to an suitable audio output device like home stereo system, active speakers, etc.
3. Plug the power adaptor into the mains power wall socket.
4. The adapter starts automatically and performs a full scan of the DAB+ band the first time it is
used.
5. When scanning is complete, the radio will select the first available station and begin the
playback. By default, stations are sorted first by numbers and then by letter.
6. Press the button to put the adapter into standby.

4. Basic functions

4.1. Adjusting the volume

Use the arrow keys ◄/► on the remote control to adjust the volume.

4.2. MENU navigation

• Use the arrow keys ▲/▼ to scroll through the MENUs.
• Move to the next sub MENU by using the arrow key ► or confirm your selection by pressing
OK.
• Go back to the previous MENU by pressing ◄.

4.3. Change mode between DAB+, FM and Bluetooth

Press the Mode button on the remote control or at the backside of the adapter to switch between
DAB+ / FM / Bluetooth mode
17