Before First Use - Albrecht Audio DR 56+ Mode D'emploi

3. Before first use:

1. Attach the DR 56+ car radio adapter to the windscreen
using the suction mount included in the product contents.
Connect one end of the USB power cable to the Micro
2.
USB port on the right side of the DR 56+ and the other
end to the USB power adapter. Plug the USB power
supply into the cigarette lighter of your car.
Connect the supplied antenna to the antenna input on the
3.
right side of the DR 56+.
Switch on the device by pressing the On/Standby button
4.
on top of the device, and the Albrecht logo appears in
the display. When used for the first time, the device
automatically searches for available DAB/DAB+ stations
and stores them in the device's station memory until
another DAB station scan is performed. During the DAB
Autoscan, a bar indicates the progress of the scan.
If the Full Scan is not started automatically, long press the
5.
Menu button and select DAB Autoscan from the menu.
As soon as the station scan is completed, you can select
6.
any of the stored DAB/DAB+ radio stations by turning the
◄► knob.
26