Dynamic Range Control (Drc); Fm Mode; Tuning To A Fm Station; Manual Tuning - Albrecht Audio DR 50 B Guide D'utilisation

5.7. Dynamic Range Control (DRC)

If you are listening to music with a high dynamic range in a noisy environment, you may wish to
compress the audio dynamic range. This makes quiet sounds louder, and loud sounds quieter.
Press MENU and select DRC. There are 3 levels of compression:
• DRC off - no compression. This is the default setting.
• DRC low - medium compression.
• DRC high - maximum compression.
Note: This function is only working correctly if the radio station is supporting this feature.

6. FM Mode

If you are not already in FM mode, press the Mode button to go to FM mode. If you were listening to
a FM station when you switched the radio off, then this station will automatically be selected when
you switch the radio back on.

6.1. Tuning to a FM station

6.1.1. Manual Tuning

Use the arrow keys ▲/▼, to change the current frequency in 0.05 MHz steps. Press and hold the
arrow keys to start an automatic scan until the next available station is found.

6.1.2. Automatic scan for FM stations

Press the Scan button to automatically scan through the complete FM band for available stations.
The first 20 found stations will be saved in your favorites.
Attention: the scan overwrites all your previously saved favorites!

6.2. Scan settings

Press MENU and select Scan settings.
There are two different options to choose from:
1. Strong stations - The scan will only stop when a strong signal strength is received which should
also result in a better audio quality. It is possible that the station you are scanning for may be
missed using this option.
2. All stations - The scan will stop for every station it receives, even if the signal strength is poor.
19