Managing Phone Call; Phone Speaker Settings - Albrecht Audio DR 56 Guide D'utilisateur

Remark: The process of re-connecting to the last
connected phone, may take several seconds to one minute
depending on model of your mobile phone. During the re-
connecting process, the Bluetooth icon at the top of blue
bar will be flashing and the LCD will show "Not Connected".
You can disconnect a currently paired phone by pressing
and holding the "TX/Scan" button to force the DR 56 into
pairing mode and connect another new phone.
Remark: The flashing of the Bluetooth icon indicates the
Bluetooth is not connected and once it is connected, the
icon will stop flashing.
7.3

Managing Phone Call

1. When there is an incoming call, the DR 56 rings with
a ringtone. Press the "Preset" button to answer a call
and at the same time the speaker phone volume and
talk time will be displayed at the bottom of the screen.
You may use Tuning Knob to adjust the volume level.
Press and hold the "Preset" button to decline a call
2.
To end a call, press the "Preset" button again.
3.
7.4

Phone Speaker Settings

Press and hold the "Menu" button to enter the menu.
1.
Use the "Tuning Knob" to scroll down the menu to
2.
select "Phone Speaker Setting", press the "Menu"
button to confirm.
In the "Phone Speaker Setting" menu, use the
"Tuning Knob" to select "Built-in Speaker" or "Car
Speaker" and confirm by pressing the "Menu" button
again.
38
English