Publicité
Les langues disponibles
Les langues disponibles
Listening to a CD (CDs)
CD-XP300H
ENGLISH
This system can also play audio CD-R and CD-RW discs, but cannot record.
Some audio CD-R and CD-RW discs may not be playable due to the state of disc or
the device that was used for recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the
OPEN/CLOSE button to open the disc tray.
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to turn the
disc tray, then place the CD in the open position.
z CDs can be placed on any open position on the disc tray.
z Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
E-11
Sound control (See page 9.)
5
Press the
Total number of tracks on the CD
whose number is flashing
6
To select the CD you want to listen to first, press one of
buttons on the remote control.
7
Press the
z Playback will begin from track 1 on the disc you have selected to play. After
that disc finishes playing, the next disc will automatically start playback.
z When the last track on the third disc has finished playing, the CD player will
stop automatically.
z When there is no CD in one of the disc 1 - 3 positions, that position will be
skipped and the next CD will be played.
To interrupt playback:
Press the CD
To resume playback from the same point, press the
To stop playback:
Press the
button.
To remove the CDs:
Whilst in the stop mode, press the
12 cm (5") 8 cm (3")
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
OPEN/CLOSE button to close the disc tray.
Total playing time of the CD whose
number is flashing
/
(
) button to start playback.
button on the remote control.
button.
OPEN/CLOSE button.
01/12/11
CD-XP300H(H)E2.fm
1 -
3
Publicité
