JANE nurse cruiser Instructions page 21

GB
cruiser
If you don't have ISOFIX insert guide, please Ignore this step.
NOTE! The ISOFIX attachment points are located between the surface and the backrest of the vehicle seat.
Press the ISOFIX button to pull out the two locking arms from the base bottom. Pull the locking arm to
and fro until you hear an audible CLICK which indicates they are fully engaged. And on both sides of
the locking arms' button turn into green safety color.
NOTE: Please ignore this step if you don't want to use ISOFIX connector.
Step 1: First pull out the belt from the belt ALR.
Diagonal belt through the same side of Guidance
then pull the diagonal belt and lap belt together through another side of Guidance
NOTE: Keep the diagonal belt at the position of shoulder between the outside of the neck and shoulder
(Middle of point A and point B). (see picture a)
Step 2: Lock the tip of the buckle into the vehicle seat buckle with a CLICK noise. Follow the direction
of arrow to tighten belt, and put redundant belt into cloth cover. Shake the child safety car seat to make
sure it is securely attached.
CAUTION! The diagonal seat belt section must run diagonally backward. You can adjust the course of
the belt with your vehicle's adjustable belt deflector on both sides.
*ISOFIX connector is optional, you can ignore this step if you don't want to use it.
**Ensure the lap belt is as close as possible to lower. Ensure the lap belt is on the pelvis, not on the
abdomen.
CARE AND MAINTENANCE
Periodically inspect your child seat for worn or damaged parts. If damaged parts are found, replace the
child seat. Keep the child seat clean. Do no lubricate any parts of the child seat. To prolong the life of
your nursery product, keep it clean and do not leave it in direct sunlight for extended periods of time.
Removable fabric covers and trims may be cleaned using warm water with a household soap or a mild
detergent. Allow it to dry fully, preferably away from direct sunlight.
CLEANING THE BUCKLE
Food, drink, or other debris may collect inside the harness buckle which can affect proper functioning.
Wash in warm water until clean. Be sure you can hear an audible click to make sure the buckle is
working properly.
CLEANING THE HARNESS AND SHELL
Sponge clean using warm water and mild soap; do not use any other cleaning agents.
STORAGE
Store in a safe, dry place and away from heat and direct sunlight. Avoid placing heavy objects on top of
the seat.
30ºC
Wash at or Do not
below bleach
INFORMATION ABOUT THE GUARANTEE
- This item is guaranteed against manufacturing defects as stipulated in the legal Directives and/or
regulations in force on guarantees for consumer goods applicable to the European Union and those of
the country in which it is marketed.
- It is essential to present the purchase invoice or receipt in order to process the guarantee through the
seller of the item or, failing that, through the manufacturer.
- The guarantee excludes anomalies or faults caused by misuse, non-compliance with the safety
regulations and instructions for use and maintenance provided, or due to wear and tear caused by
normal use and regular handling of the item.
- The label containing the serial number of your model must not be torn off under any circumstances
as it contains information relevant to the guarantee.
MAIN TECHNICAL PARAMETER
Length: 500mm
Width: 440mm
Height: 600-800mm
, lap belt through the same side of Guidance
Do not Do not
iron dry clean
500mm
440mm
.
Do not
Dry flat in
tumble dry
shade place
,
21