Before First Use - ARTHUR MARTIN ASF5206LOW Notice D'utilisation

2. To enter the user mode, press and
hold Départ Différé. At the same time
turn the knob counterclockwise until
the programme marker indicates the
first programme. Release the Départ
Différé when the indicators Départ
and on/off start flashing.
• The intermittent flashing of
shows the current setting, e.g. 5
flashes + pause + 5 flashes = level
5.
3. Press Départ Différé repeatedly to
change the setting. Each pressing of
Départ Différé increases the level
number. After reaching level 10, the
count starts again from level 1.
4. To confirm the setting, turn the
programme knob until the programme
marker is again in on/off position
AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically and
remains ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.

BEFORE FIRST USE

1. Make sure that the current level of
the water softener agrees with the
AirDry is automatically activated with all
programmes excluding
CAUTION! If children have
access to the appliance, it is
advised to deactivate AirDry as
opening the door may pose a
danger.
How to deactivate AirDry
The appliance must be in programme
selection mode.
Make sure that the programme marker on
the knob is set to on/off position.
1. To enter the user mode, press and
hold Départ Différé. At the same time
turn the knob counterclockwise until
the programme marker indicates the
first programme. Release Départ
Différé when the indicators Départ
and on/off start flashing.
2. Turn the knob counterclockwise until
the programme marker indicates the
second programme.
• The indicator
setting: on = AirDry is activated.
3. Press Départ Différé to change the
setting.
• If the indicator
deactivated.
4. To confirm the setting, keep turning
the programme knob until the
programme marker is back in the
on/off position.
9
(if applicable).
shows the current
is off = AirDry is