What To Do If - IKEA FRAMTID OV9 Mode D'emploi

Masquer les pouces Voir aussi pour FRAMTID OV9:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Side rails
To clean the side walls of the oven cavity, re-
move the side rails.
1
Pull the rails away
from the oven wall at
the front.

What to do if...

Problem
The oven does not op-
erate
The oven does not op-
erate
The temperature indica-
tor does not come on
The oven lamp is not
working
2
2
1
Then unhook the rails
at the back.
Possible cause
The required setting have not
been set
The appliance is not correctly
connected or/and the mains
supply to the oven is not on
The required setting have not
been set
The oven lamp bulb is faulty
To put the side rails back, follow the instruction
in reverse.
Important! The rounded ends of the guide
bars must point to the front.
Changing the oven lamp and cleaning the
glass cover
Warning! Before you change the oven
lamp (refer to "Product description"),
switch off the appliance and disconnect it from
the electrical supply.
1. Turn the glass cover anti - clockwise and
remove it. Clean the glass cover.
2. If necessary, replace the old oven lamp
with a 15/25 watt, 230V (50Hz), 300 °C
heat resistant oven lamp (Connection type:
E14).
3. Refit the glass cover.
check if cooking function and tem-
perature are selected
Check if the appliance is correctly
connected and the mains supply
to the oven is on
Select the cooking function and
temperature
Replace the oven lamp bulb
12
Solution

Publicité

Table des Matières
loading

Table des Matières