Daily Use - IKEA SMAKLIG Mode D'emploi

ENGLISH

Daily Use

Switching on and off
Touch for 2 seconds to switch the
appliance on or off.
Adjusting the heat setting
Touch the control bar at a desired heat
setting. Correct to the left or the right, if
necessary. Do not release before you reach
a desired heat setting.
Bridge function
The function connects two cooking zones
and they operate as one. First set the heat
setting for one of the cooking zones.
To activate the function touch
change the heat setting touch one of the
control sensors.
To deactivate the function touch
cooking zones operate independently.
Using the Booster function
The Booster function makes additional
power available to the induction cooking
zones. Touch to switch it on, a
up on a display. After maximum 10 minutes,
the induction cooking zones automatically
return to cooking level
Power management
The power management shares the
maximum available power between two
cooking zones generating a pair (see
picture). Booster function can cause, that the
. To set or
. The
lights
.
maximum available power for a pair is
exceeded. Then the second cooking zone
will be automatically reduced to a lower
power level. The display for the reduced
zone alternates between selected and
maximum available.
Using the Timer
Touch repeatedly until the pilot light of a
desired cooking zone displays. For example
for the front left zone.
Touch or of the Timer to set the time
between 00 and 99 minutes. When the
pilot light flashes more slowly, the time
counts down. Set the heat settings.
If the heat setting is set and the time set has
elapsed, acoustic signal appears, 00
flashes, and cooking zone switches off. If
cooking zone is not in use and the time set
10