Chauvin Arnoux C 320 Notice De Fonctionnement page 42

English
Then press on the:
The alphanumeric display indicates:
100/100 corresponds to 5V
The numerical display indicates the present setting.
Press the:
validate.
To adjust the numerical display to the desired 100/100 value (from 0/100 to 1999).
Then on the:
The C320 then returns to the measurement mode.
NOTE: Do not change the measurement range while using the recorder
output.
42
key to validate
100/100
or
key to validate.
Conductimeter C 320
key to