KIKKA BOO BABY WALKER Mode D'emploi page 4

THANK YOU FOR CHOOSING OUR PRODUCT.
IMPORTANT! READ CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE. THE CHILD MAY BE HURT IF YOU DO NOT
FOLLOW THESE INSTRUCTIONS.
COMLIES WITH EN 1273:2020, EN 62115: 2005 + A12: 2015, EN71-2: 2011+A1: 2014, BS EN71-1: 2014
WARNING!
• This product is intended only for a child who can sit up by itself and until it is able to walk by itself or weight more than 12 kg.
• Do not use until baby can sit up by itself.
• Prevent collisions with glass in doors, windows and furniture.
• Do not use the baby-walking frame if any components are broken or missing.
• This baby-walking frame should be used only for short periods of time (e.g. 20 min).
• Ensure that all locking devices are engaged before use.
• Do not impose any extra weight as this may affect the walker' s stability.
• Make sure the child' s feet touch the ground when riding. Make sure the child is not in when moving the walker.
• Clean (friction components) regularly to maintain stopping performance.
• Never leave your child unattended. Always keep child in view while in walker. Use only on flat surfaces free of objects that could
cause the walker to tip over. To avoid burns, keep child away from hot liquids, rangers, radiators, space heaters, fireplaces, etc.
• To avoid serious injury or death, block stairs/steps securely before using walkers.
• Do not use accessories or replacement parts other than those approved by the manufacturer or distributor.
• Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Do
not charge non-rechargeable batteries. Adult supervision is required when charging rechargeable batteries. Always remove flat or
exhausted batteries from the toy. Do not short circuit the supply terminals.
TO ASSEMBLE ACTIVITY WALKER
1. Using the wheels: Fit the 8 wheels in the appropriate housings. Ensure that the wheels are firmly pushed all the way into the
housing on the base of the walker. If friction pads are not included, the Figure 2 is not available.
2. Using the wheels and friction pads: Attach 2 rotating wheels in the front housings, 2 rear wheels at the back, and fitted to the
end as shown in Figure2.1. Fit the 6 friction pads into the appropriate housings. Ensure that the joints are firmly and correctly
fitted to the end as shown in Figure 2.2.
3. Using the push bar: place the push bar in the appropriate housings and fitted to the end Figure 3.
4. Attach the seat pad: Insert the plastic pins on the back of the seat into the holes Figure 4 (a), and then click the pins into position
by pushing them forward. Insert the 3 plastic pins on the front of the seat into the holes Figure 4 (b), push them downwards until
it clicks into place. Adjust the desired position, using the adjustable device under the top tray.
5. Using the music tray: gently pull off a toy from the toy tray. Remove the cover from the toy. Install 2 x AA (1.5 V) alkaline
batteries (not included) into the battery compartment. Ensure that the batteries are facing the appropriate polarity as shown in
Figure 5.1 and 5.2. Replace cover and screw it back to the toy. Insert the toy frame to the hole on toy tray and press into place as
shown in Figure 5.3. Place the toy tray corresponding to the front part of the toy tray. Hold the toy tray by one hand, press knob
upside to the end of another hand as shown in Figure 5.4 (a), and turn clockwise for 90 degrees to lock (as shown in Figure 5.4(b)).
Music button is under the music tray as shown in Figure 5.2 (a).
CARE AND MAINTENANCE • Ensure that all parts are working well before use. Always check parts regularly for wheels, locking
devices seat pad and so on every 15 days. • In some climates the covers and trims may be affected by mold and mildew. To help
prevent this occurring, do not fold or store the product if it is damp or wet. • Wipe plastic parts with a damp cloth using mild soap. •
To clean the seat pad, footpad, canopy, use only mild household soap and warm water with a sponge or cloth. DO NOT MACHINE
WASH.
ENGLISH