Toshiba RBC-AMS41E Mode D'emploi page 6

01-01RBC-AMS41E_EN.fm Page 4 Friday, April 18, 2008 9:53 AM
Parts and their functions
28 Operation reservation
This appears for the days of the week on which
programs have been set.
29 Days of the week display
Button operation area
49
48
47
46
45
32 ON/OFF button
Shortly after this button is pushed, operation starts,
and operation stops shortly after the button is pushed
again.
33 FAN button
Use this to select the desired air speed mode.
34 MODE button
Use this to select the desired operation mode.
35 VENT button
Use this when a ventilation fan or other unit,
purchased on the market, has been connected.
36 LOUVER button
Use this to select the louvers when setting the air
direction for each louver or when fixing the louvers in
place.
37 UNIT button
Use this to select the indoor unit to be operated when
operating a multiple number of indoor units using one
remote controller.
38 SAVE button
Use this when performing save operations.
39 SWING/FIX button
Use this to select the desired air direction or swing
operation.
40 TIME buttons
Use this to set the clock or adjust the time when the
operating time is set.
41 CL button
Use this when clearing the setting of the program (for
a scheduled operation or timer operation) which is
being set.
4
30 Special holiday
This appears for a day of the week which has been
set as a special holiday.
31 Day arrow
This indicates the current day of the week or day on
which a program is set.
50
44 43 42 41 40 39
42 SET button
Use this when entering the settings of the program
(for a scheduled operation or timer operation) which
is being set.
43 TEST button
Use this for servicing.
* This button is not normally used.
44 FLT.RESET button
Use this to reset (extinguish) the filter display.
45 DAY button
Use this to select the targeted day of the week when
setting the clock or setting a program.
46 PROGRAM button
Use this when starting and ending the program
settings for scheduled operations.
47 Grille button
Use this to raise or lower the grille.
48 SCHEDULE button
Use this when executing or releasing scheduled
operations or when selecting ON or OFF for timer
operations.
49 TEMP buttons
Push
desired value.
* These buttons are also used to raise or lower the
grille when the grille function is used.
50 ON lamp
This lights during operation. It blinks when trouble
has occurred or when a protection operation is
performed.
32
33
34
35
36
37
38
and to set the temperature to the