155V Unit Installation Configuration - Airwell DK 125 Manuel D'installation Et De Maintenance

305 - 405m - 405 - 505 - 605
A
125v - 155v UNIT INSTALLATION CONFIGURATION
Select the appropriate configuration for the inlet panel
and the mounting angle brackets before installing the
unit.
This unit can be configured for air inlet from the rear
(1), from above (2), or below (3).
Then select the mounting location for positioning the mounting angle brackets:
Ceiling mounting
For the refrigerant pipes, break the brazing on the Gas and
Liquid pipes at the level of Rep. A and re-weld the pipes
in the required configuration.
Floor mounting
12
1
2
3
Wall mounting