Télécharger Imprimer la page

Techno Line WS 6832 Mode D'emploi page 14

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Remarks: Moving your weather station around your house or your building will affect its accuracy
because the sudden change of attitude will affect the accuracy of your weather station. After your
weather station is powered up, it will take around 24 hours to get stable. The weather icons on the
display give a reference to the next 6-12 hours weather conditions. It may not match with the current
weather condition outside.
If You Lose the Outdoor Temperature
When the outdoor temperature digits show "--", the wireless transmission is either interrupted or lost.
Press & hold
button of the weather station then take out and re-install batteries to your outdoor
transmitter. If you continue to lose the outdoor temperature display, try placing the transmitter in a
different location until you have smooth transmission of temperature data.
TROUBLE SHOOTING
In case your clock shows irrelevant information or digits, it maybe affected by electrostatic discharge
or interferences from other devices. Press the RESET button on the back of your clock. Your clock
will be reset to default setting of time and calendar and it will start to receive radio controlled time
signal again.
SPECIFICATIONS
Operation Temperature: 0°C to + 45°C
Temperature Range
Indoor
0°C to +50°C (display shows HH.H / LL.L if out of this range)
Outdoor
-40°C to +70°C (display shows HH.H / LL.L if out of this range)
Temperature Resolution
Alarm Duration
Snooze Duration
1°C
2 minutes
5 - 60 minutes
GB 7

Publicité

loading