Techno Line WS 6832 Mode D'emploi page 13

4. Press SET again, display shows
from 5 to 60 minutes
5. Press SET to return to normal mode or it will return to normal mode in around 8 seconds if no
further press of any other buttons.
Your clock is in 24-hour display format.
TO SET ALARM (Default alarm setting is 6:00 AM)
Press and hold AL ON.OFF, the hour digits flash with "AL" icon appears. Press
1.
your desired alarm hours. Press and hold
2. Press AL ON.OFF again, the minute digits flash. Press
minutes. Press and hold
3. Press AL ON.OFF again or if no further press of any other buttons in around 10 seconds to
exit alarm setting mode.
TO TURN ON OR OFF YOUR ALARM
Single press AL ON.OFF to turn on or off the alarm. When the alarm function is turned on, the AL
icon appears on top of the time digits.
TO USE SNOOZE ALARM (Default snooze duration is 5 minutes)
When time reaches your set alarm time, your clock will sound to wake you up. The AL icon will flash.
Press once to stop the alarm temporarily, AL icon keeps flashing. The alarm will beep
again in 5 minutes or after your set snooze duration.
TO STOP AND RESET THE ALARM TO COME ON THE NEXT DAY
To stop the daily alarm, press any button EXCEPT the
will stop and AL icon becomes static; alarm will beep again same time next day.
TO USE THE DIMMER FUNCTION
Press once to adjust the High / Low brightness of the display.
TO USE THE WEATHER FORECASTER
There are four types of weather display in your weather station:
:05
and flash. Press
or
or to accelerate setting at high speed.
SUNNY
SUNNY AND CLOUDY
CLOUDY
RAINY
/ button to set snooze duration
to accelerate setting at high speed.
/ to set your desired alarm
when alarm is beeping. The alarm
/ to set
GB 6