Product Description And Type Designation - Videotec WASEX Manuel D'instructions

INFO
Description of system specifications.
We recommend reading this part carefully
in order to understand the subsequent
stages.
• Given the considerable weight of the system, use
an appropriate transport and handling system.
The staff must carry out the handling of the
product in compliance with the common accident
prevention standards.
• Before proceeding with installation, check the
supplied material to make sure it corresponds
to the order specification by examining the
identification labels.
• The equipment is intended for installation in a
Restricted Access Area by specialist technical staff.
• The manufacturer declines all responsibility
for any damage caused by an improper use
of the appliances mentioned in this manual.
Furthermore, the manufacturer reserves the right
to modify its contents without any prior notice.
The documentation contained in this manual has
been collected and verified with great care. The
manufacturer, however, cannot take any liability
for its use. The same thing can be said for any
person or company involved in the creation and
production of this manual.
• Since the user is responsible for choosing the
surface to which the unit is to be anchored, we
do not supply the fixing devices for attaching the
unit firmly to the particular surface. The installer
is responsible for choosing fixing devices suitable
for the specific purpose on hand. Use methods
and materials capable of supporting at least 4
times the weight of the device.
MNVCWASEX_2222_EN
4 Product description and
type designation
The WASEX washer pump is an important element
for effective video surveillance in hazardous
areas because it guarantees sharp images in all
environmental conditions and reduces the need for
maintenance.
The WASEX system is designed for the MAXIMUS
series and is also compatible with third-party
products.
The kit is composed of a 10-litre stainless steel tank
with an explosion-proof certified solenoid valve
and some versions of the product also have an
explosion-proof certified pressure switch.
The WASEX version with pressure switch has a clean
contact that switches when the tank pressure goes
under a preset value.
The pressure switch can be connected to the
alarm of the MAXIMUS series cameras or it can be
connected directly to the alarm of the main electric
box, to warn operators to reset the pressure and
level of the water.
7