Videotec WASEX Manuel D'instructions page 8

DANGER!
High level hazard.
Risk of electric shock. Disconnect the
power supply before proceeding with any
operation, unless indicated otherwise.
• Electrical connections must be performed with
the power supply disconnected and the circuit-
breaker open.
• A power disconnect device must be included
in the electrical installation, and it must be very
quickly recognizable and operated if needed.
• The device can only be considered to be
switched off when the power supply has been
disconnected and the connection cables to other
devices have been removed.
• Be careful not to use cables that seem worn or old.
• All the cables must comply with IEC60332-1-2, IEC
60332-1-3 and IEC/EN60079-14.
• This equipment is not suitable for use in locations
where children are likely to be present.
6
CAUTION!
Medium level hazard.
This operation is very important for the
system to function properly. Please read
the procedure described very carefully
and carry it out as instructed.
• Ensure the installation meets local specifications.
• Make connections and tests in the laboratory
before carrying out installation on site. Use
appropriate tools for the purpose.
• Check that the power supply socket and cable are
adequately dimensioned.
• Use suitable cables that can withstand the
operating temperatures.
• All disconnected cables must be electrically
isolated.
• Make sure the product is to be secured to building
before operation.
• The manufacturer declines all liability for damage
to any of the apparatus mentioned in this
handbook, when resulting from tampering, use of
non-original spare parts, installation, maintenance
and repairs performed by non-authorised, non-
skilled personnel.
• For damage to any parts, repair or replacement
must be done by, or under supervision of
VIDEOTEC.
• This product must only be repaired by suitably
trained personnel or under the supervision of
VIDEOTEC personnel in accordance with the
foreseen terms and conditions: IEC/EN60079-19.
• Only use original VIDEOTEC spare parts. Strictly
adhere to the maintenance instructions attached
to each replacement kit.
• For technical services, consult only and exclusively
authorized technicians.
• We strongly recommend using only approved
brackets and accessories during installation.
MNVCWASEX_2222_EN