Technical Data; Mechanical; Electrical; Environment - Videotec WASEX Manuel D'instructions

10 Technical data

10.1 Mechanical

Materials:
• External enclosure: stainless steel AISI 316L
• Antistatic water delivery pipe: antistatic polymer
Antistatic water delivery pipe (supplied):
• Length: 20m (66ft)
Schrader type compressed air filling valve
Pressure: 6bar max
Delivery:
• 20m (66ft), 4bar (with 20m water delivery
antistatic pipe supplied)
• 30m (98ft), 6bar (with 30m water delivery
antistatic pipe available as an accessory)
Water tank capacity: 10l (2.6gal)
Cable inputs:
• 1 x 1/2" NPT (WASEX2T4AT, WASEX2T4GOR,
WASEX2T4IC, WASEX2T4IN, WASEX2T4UL)
• 2 x 1/2" NPT (WASEX2T4ATPR)
Dimensions (WxHxL): 429x697x255mm
(16.9x27.4x10in)
Unit weight: 18kg (40lb) (WASEX2T4AT,
WASEX2T4GOR, WASEX2T4IC, WASEX2T4IN,
WASEX2T4UL); 20Kg (WASEX2T4ATPR)

10.2 Electrical

WASEX2T4AT, WASEX2T4GOR, WASEX2T4IC,
WASEX2T4IN, WASEX2T4UL
Solenoid valve:
• Power supply: 24Vac, 50/60Hz or 24Vdc
• Consumption: 5W
WASEX2T4ATPR
Solenoid valve:
• Power supply: 24Vac, 50/60Hz or 24Vdc
• Consumption: 5W
Pressure switch: dry contact for alarm signal
management
Consult the use and installation manual of the pressure switch for
further information (supplied).
MNVCWASEX_2222_EN

10.3 Environment

WASEX2T4AT, WASEX2T4GOR, WASEX2T4IC,
WASEX2T4IN, WASEX2T4UL
For indoors and outdoors installation
Operating temperature of solenoid valve: from -40°C
(-40°F) up to +60°C (140°F)
Operating temperature of device: depending on the
solidification temperature of the liquid
Relative humidity: from 5% up to 95%
WASEX2T4ATPR
For indoors and outdoors installation
Operating temperature of solenoid valve: from -40°C
(-40°F) up to +60°C (140°F)
Pressure switch working temperature: from -40°C
(-40°F) up to +80°C (+176°F)
Operating temperature of device: depending on the
solidification temperature of the liquid
Relative humidity: from 5% up to 95%
10.4 Certifications - Marine
applications
WASEX2T4AT, WASEX2T4GOR, WASEX2T4IN
Lloyd's Register Marine Type Approval certification:
• Test Specification Number 1 (ENV1, ENV2, ENV3,
ENV5)
Salty fog resistance: EN60068-2-52
Tested at 70°C (158°F) for 16 hours in compliance
with EN60068-2-2
23