Washer Installation (Maximus Mvx) - Videotec WASEX Manuel D'instructions

6.13 Washer installation
(MAXIMUS MVX)
Fasten the bracket (01) onto the body of the camera
with the metal clip (02) provided.
Fasten the support for the delivery pipe (03) by
means of the screws and washers provided (04).
02
01
03
04
Fig. 36
Unscrew the nozzle (05) from the semi-rigid pipe.
Insert the nozzle (05) through the hole in the
support bracket (03) and secure with the nut and
washer provided (06).
05
06
Fig. 37
Screw the semi-rigid pipe (07) to the nozzle fixed to
the bracket.
20
04
07
Fig. 38
Shorten the semi-rigid washer pipe (07) as needed.
Unscrew the nut (08) and slide it along the pipe.
Insert the end of the pipe into the spinner (09).
Fig. 39
Lock the nut to the coupling.
Fig. 40
Connect the supply pipe (10).
07
Fig. 41
To start the wash system refer to the camera manual.
09
08
07
10
MNVCWASEX_2222_EN