Publicité
Les langues disponibles
Les langues disponibles
13
EN
Adjusting the back length
Before your trip, be sure that the impact protector BP100 completely covers the area to be protected. To do
this, be sure to read the attached instructions for the BP100 impact protector.
Recommendation for the adjustment of the back length (see table on the back page of these instructions).
To assess the correct fit of your BP1 Protect, your height and clothing size can be used. All measurements are suggestions
and are based on average body sizes. Personal fit and preference may vary.
1.
Loosen the Velcro of the straps
3.
Grab the small flap
with the index finger of the left hand.
3
At the same time, press onto the shoulder plate with the right
hand
and lift the flap to completely loosen the Velcro of the
4
insertion pocket
.
5
5
3
and pull it out upwards.
1
1
4
2.
Remove the protector
2
4.
Keep the insertion pocket
plate on the right outer corner in the desired position under
consideration of the size indicator (XS – XL)
6
XS - XL
5
in an upward direction from the bag.
2
open and slide the shoulder
5
.
6
Publicité
