Epson TM-C3400-LT Manuel D'utilisation page 21

1. Attach the paper ejection tray to the hooks under the paper
ejection table.
2. Pull the lever at the bottom-right of the paper ejection tray to
unlock it.
3. Slide the bottom tray to align it with the paper length, and lock it.
Cleaning the Autocutter
Adhesive from labels may stick to the fixed blade of the autocutter,
which may prevent the autocutter from cutting paper cleanly. If this
happens, follow the steps below to clean the autocutter.
1. Turn off the product and disconnect the power plug from the wall
outlet.
2. Open the roll paper cover to remove the paper.
Paper ejection table
TM-C3400-LT User's Manual 21
English