Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Home Theatre System
Startup Guide
HT-S20R
1
Deciding the installation position
Bar speaker
Subwoofer
Note
• Disconnect the AC power cords (mains leads) of the TV and devices from the AC outlets (mains) in advance. The AC power cords must be reconnected in step 4.
• Place the subwoofer 5 cm or more away from a TV rack, walls, etc.
• Check the labels on the bottom of the each surround speaker to identify "SUR L" (left) and "SUR R" (right).
2
Connecting the speakers
Green
White
Red
Subwoofer
Note
• Connect the speaker cords to the matching color of the SPEAKERS jacks on the rear panel of the subwoofer.
GB
FR
What's in the box
Bar speaker (1)
Subwoofer (1)
Remote control (1) /
AC power cord (mains lead) (2)
R03 (size AAA) battery (2)
WALL MOUNT TEMPLATE (1)
Operating Instructions
To set up the remote control
5-010-728-11(1)
To mount the bar speaker and the surround speakers
on a wall
For details, refer to the Operating Instructions (separate
document).
Gray (from SUR R)
Blue (from SUR L)
SUR R
3
Connecting with a TV
Surround speaker (2)
Optical digital cable (1)
Startup Guide
(this document)
: Video signal
: Audio signal
* If your TV does not support the ARC (Audio Return Channel) function, connect an optical digital cable (supplied) or a stereo mini cable (not supplied) to listen to the TV sound.
4
Turning on the system
Turn on the TV.
Connect the AC power cord (mains lead) (supplied) to the subwoofer, then connect the AC power cord (mains lead) (supplied) to the AC outlet (mains).
The front panel display on the subwoofer lights up.
The remote control of the system does not work until [HELLO] in the front panel display on the subwoofer disappears.
Press  (power) on the remote control of the system.
[TV] appears in the front panel display on the subwoofer.
5
Listening to a TV
SUR L
Press INPUT to select the proper input source according to the cable connecting with a TV.
Input sources to be selected
• [TV]: Select this when using an HDMI cable or an optical digital cable to connect with a TV.
• [ANALOG]: Select this when using a stereo mini cable to connect with a TV.
Select the program you want using the TV remote control.
Press  +/– to adjust the system volume and press SW +/– to adjust the subwoofer volume.
Bar speaker
Note
• Depending on the order in which you turn on the TV and the system, the system may enter muting mode. In this case, turn on the TV first, then the system.
Are there any HDMI IN jacks on your TV?
YES
Labeled
"ARC"
Not
labeled
Blu-ray Disc™
player, cable box
or satellite box,
etc.
HDMI cable
HDMI cable
Optical digital cable
(not supplied)
(not supplied)
(supplied)*
: Video signal
: Audio signal
Front panel display
HELLO
Power ON
AC power cord
(mains lead) (supplied)
/
TV
ANALOG
NO
"ARC"
Blu-ray Disc™
Blu-ray Disc™
or
player, cable box
player, cable box or
or satellite box,
satellite box, etc.
etc.
Stereo Mini
Optical digital
cable
cable
(not
(supplied)*
supplied)*
: Audio signal
TV
INPUT
+/–
SW
+/–
© 2020 Sony Corporation Printed in China

Publicité

loading

Sommaire des Matières pour Sony HT-S20R

  • Page 1 • Depending on the order in which you turn on the TV and the system, the system may enter muting mode. In this case, turn on the TV first, then the system. Note • Connect the speaker cords to the matching color of the SPEAKERS jacks on the rear panel of the subwoofer. © 2020 Sony Corporation Printed in China...
  • Page 2 * Si votre téléviseur ne prend pas en charge la fonction ARC (Audio Return Channel), raccordez un câble numérique optique (fourni) ou un mini-câble stéréo (non fourni) pour pouvoir entendre le son du téléviseur. Mise sous tension du système HT-S20R Afficheur du panneau avant...