D-Link AC1200 Guide D'installation Rapide page 8

Plug the supplied power adapter into your DAP-1665 and connect it to the outlet or surge
1
protector. Press the Power button on the back of the device. Verify that the Power LED is lit.
Attach one end of the included Ethernet cable to the LAN port on the back of the DAP-1665, and
2
the other end into the Ethernet port on your wireless router.
From the computer connected to your wireless router, open a web browser (e.g., Internet Explorer,
3
Firefox, Safari, or Chrome) and enter http://dlinkap.local./. If you have more than one access point,
enter http://dlinkapxxxx.local. (where xxxx represents the last four digits of the access point's MAC
address, which is located on the label on the bottom of the device).
8
Installation
Access Point Mode
RESET
LAN LAN
5V
RESET
LAN
5V 1A
WPS
1A
USB
1
2
LAN
3
4
INTERNET
POWER
12V 2A
DAP-1665 Install Guide