D-Link AC1200 Guide D'installation Rapide page 17

If the Wi-Fi Network you selected is secure, you will need to enter the Wi-Fi
8
Password and click Next to connect.
From your wireless device, go to the Wireless Utility to display the available
1
wireless networks and select the Wi-Fi Network Name (SSID) that you created
for the DAP-1665. The default Wi-Fi network name and password are located
on the configuration card.
Your device is now connected to the DAP-1665 and can connect to your
2
wireless router. If you want to change your network settings, password, etc.,
follow the steps on page 14 to Configure Using a Web Browser. To connect
additional devices, repeat step 1.
Your setup is complete!
Note: The DAP-1665 must be set up as a Repeater or Access Point.
DAP-1665 Install Guide
Connect Your Wireless Devices
to the DAP-1665*
DCWWAPWIFI0010
17