D-Link AC1200 Guide D'installation Rapide page 12

Note: For optimal performance using Repeater Mode, place your DAP-1665 in between your router
and your dead zone, making sure it's placed in a location where the signal is still strong.
From your wireless device go to the Wireless Utility to display the available
4
wireless networks and select the Wi-Fi Network Name (SSID) that is located
on your configuration card (ex: dlink-a8fa). Then, enter the Wi-Fi password
which is also located on your configuration card. (ex: akbdj19368).
Your device is now connected to the DAP-1665 and can connect to your
5
wireless router. If you want to change your network settings, password, etc.,
follow the steps on page 14 to Configure Using a Web Browser. To connect
additional devices, repeat step 4.
Your setup is complete!
12
Connect Your Wireless Devices
RESET
LAN
5V 1A
DCWWAPWIFI0010
DAP-1665 Install Guide