Bosch GML 50 Professional Notice Originale page 27

OBJ_BUCH-1267-001.book Page 27 Monday, July 26, 2010 12:03 PM
Controlling External Audio Sources
For audio sources connected via the SD/MMC
slot 46 or the USB port 45, playback can be con-
trolled via the radio charger. The number of the
selected track is displayed at the left of indica-
tor d and the number of available tracks on the
right.
Play/Pause:
– To start playback, press the play/pause but-
ton 36. The playing time of the current track
is displayed in indicator j.
– To interrupt or continue the playback, press
the play/pause button 36 again. The current
playing time flashes in indicator j.
Selecting Tracks:
– To select a track, press the "– Seek" button
35 to scan down or the "Seek +" button 33 to
scan up, until the number of the desired
track is displayed on indicator d.
– To start playback, press the play/pause but-
ton 36.
Random Playback/Repeat:
– For random playback of all tracks on the card
or the USB stick, press the random playback/
repeat button 32 once. The indicator f ap-
pears on the display.
– To repeat all tracks in the current folder/di-
rectory, press the random playback/repeat
button 32 a second time. The indicator g ap-
pears on the display.
Note: Only in this function, the number of the
current folder/directory on the card or USB
stick will appear on the right-hand side of in-
dicator d. To change the folder/directory,
you have to return to the normal playback
first and select a track from the desired
folder/directory.
– To repeat only the current track, press the
random playback/repeat button 32 a third
time. The indicator h appears on the display.
– To return to normal playback mode, press
the random playback/repeat button 32 a
fourth time, so that none of the indicators f,
g or h appear on the display.
– To start playback, press the play/pause but-
ton 36.
Bosch Power Tools
Connecting External Audio Playback
(see figure C)
The current audio signal of the radio charger can
also be transferred to other playback devices
(e.g. amplifier and speakers).
Remove the protective cap of the "LINE OUT"
socket 42 and insert the 3.5 mm plug of a
matching AUX cable into the socket. Connect an
appropriate playback device to the AUX cable.
After removing the AUX cable, reattach the pro-
tective cap of the "LINE OUT" socket 42 to pro-
tect against dirt/debris.
Remote control
Have the remote control repaired only
through a qualified repair person and only
using identical replacement parts. This will
ensure that the functionality of the remote
control is maintained.
Do not operate the remote control in explo-
sive atmospheres, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the remote control which
may ignite the dust or fumes.
Initial Operation
Protect the remote control against mois-
ture and direct sunlight.
Do not subject the remote control to ex-
treme temperatures or variations in tem-
perature. As an example, do not leave it in
vehicles for longer periods. In case of large
variations in temperature, allow the remote
control to adjust to the ambient temperature
before putting it into operation.
The remote control remains ready for operation as
long as battery with sufficient voltage is inserted.
Position the radio charger in such a manner that
the signals from outlet opening 8 of the remote
control can directly reach reception lens 31 on
the radio charger. When the remote control can-
not be pointed directly against a reception lens,
the working range is reduced. By reflecting the
signal (e. g. against walls), the working range
can be improved even for indirect signals.
The remote control 2 can be stored in carrying
handle 3. When using the remote control, you can
fasten it e.g., to a belt loop by opening loop-clip
button 16 and attaching the remote control.
1 609 929 W38 | (26.7.10)
English | 27