KLS Martin group Herford Mode D'emploi page 32

Patient screw driver
The following patient screw drivers can be used for activation:
Patient screw driver
Straight
Angled
Combination straight / angled
for handle 25-402-99-07
Osteosynthesis screws
The following osteosynthesis screws can be used for fixing the transport mesh (M):
Osteosynthesis screws
1.5 x 4 mm to 1.5 x 7 mm
Emergency 1.8 x 5 mm
Drill-Free 1.5 x 5 mm
A stereo-lithographic model (STL model, can be ordered from KLS Martin) can be useful for
determining the exact anatomical situation and for selecting the distractor. KLS Martin strongly
recommends getting acquainted with an anatomical model about the expected anatomical
situation before surgery.
WARNING
Do not use different materials or systems in combination!
KLS Martin distraction systems must not be combined with systems from other
manufacturers!
Using instruments not specifically intended for use with implants can result in failure of the
distraction system!
32
Herford Transport Distractor
Article number (REF)
51-500-90-07
51-505-90-07
51-505-91-04
Instructions for Use
Revision 3