Stor Age - Black & Decker PERFORMANCE FP6010 Mode D'emploi

the food processor's appearance.
• Some staining of parts may occur. If so, make a paste of 2 tablespoons
of baking soda and 1 tablespoon of water. Apply to stains and let stand
overnight. Rinse and dry.
• Do not use rough scouring pads or cleansers on any plastic or metal parts
to clean.
• Do not allow blades or disks to soak in water for long periods of time.
• Remember to clean the internal shaft of the chopping blade. Use a brush
to remove any residual food particles.
• If you are having trouble closing the lid over the workbowl, apply a small
amount of vegetable oil to the rim of the cover and workbowl. This should
make the pieces work smoother when attaching the cover to the bowl.
CL EA NI N G TIP S :
• For quick clean up, combine 1 cup warm water and a drop of liquid dish
soap in the food processor workbowl.
• Cover and process on medium speed for about 30 seconds.
• Discard liquid and rinse thoroughly.
Important: do not place the processor parts in boiling liquids.
STOR AG E:
Caution: Blades are sharp. Handle carefully.
Store all the accessories in the convenient storage
case (U). The S blade, dough blade, dicing blade and
grid cleanout tool sit in the top of the storage case, as
indicated by outlined shapes that correspond with each
individual accessory.
Slide the disks and blade shafts into the front of the
storage case in the following order, top to bottom:
• Dicing Disk (store orange side down, blade towards back of storage case)
• Shredding Disk
• Slicing Disk (store with blade facing back of storage case)
• Blade shaft on the lower left
• Dicing shaft on the lower right
Important: store storage case in a location out of the reach of children.
Store the small workbowl and mini S blade in the large workbowl.
16
U