Kohler K-994 Mode D'emploi page 9

Plug
O-Rings
6. Install the Faucet
NOTICE: To avoid damage to the O-rings on the bottom of the
faucet, keep the faucet vertical and use care when installing the
faucet.
Remove the plug from the base.
Remove the rubber protector (not shown) from the faucet.
Place the faucet onto the base and insert the screws and washers
provided through the flange. Tighten the screws using the hex
wrench provided.
Kohler Co.
Base
Hex
Wrench
9
Escutcheon
Screw
Washer
Flange
1144501-2-E