Publicité
Les langues disponibles
Les langues disponibles
intEndEd uSE
The punching unit is intended for the punching of switch boxes and terminal boxes, sheets, housings,
ducts, cable entry plates, and steel doors.
tEchnicAL SPEciFicAtiOnS
Outreach (without stop)
Outreach (with stop)
Length of stop
Punching force F
Punching stroke
Hydraulic connection
Max. operating pressure
Delivery rate
Max. delivery rate when using other drive
units
Weight
Space requirement
Punching performance
Round from
Square to
Rectangular to
Special shapes
Material thicknesses
Steel sheets
Stainless steel sheets
Aluminium
Punchable plastics
Material thicknesses
Steel sheets
Stainless steel sheets
Aluminium
Punchable plastics
dEScRiPtiOn
• Robustly welded punching unit including pivoting, removable foot
• Single-acting hydraulic cylinder with hydraulic coupling
• Without tool holders and tool
270 mm
250 mm
500 mm
46 kN at 600 bar
50 mm
R 1⁄4"
700 bar
0.58 l/min. at 700 bar
0.6 l/min (this value may not be exceeded!)
50 kg
1000 mm
Ø 3.2 - 40.5 mm
28.0 x 28.0 mm
22.0 x 30.0 mm
Up to a maximum diagonal of: 40.0 mm
F = 370 N / mm
to 2.5 mm
2
F = 600 N / mm
to 2.0 mm
2
F = 22 to 4.0 mm
To 4.0 mm
F = 370 N / mm
to 2.5 mm
2
F = 600 N / mm
to 2.0 mm
2
F = 22 to 4.0 mm
To 4.0 mm
9
Publicité
