Publicité
Les langues disponibles
Les langues disponibles
mAintEnAncE And cARE
• Regularly check the hydraulic cylinder for leaks.
• Keep all moving parts dust-free and dirt-free.
• Clean only with a cloth slightly moistened with oil.
AVAiLABLE AccESSORiES
Accessory
Punch holder for round punches with mounting shaft with Ø 3.0 to 30.5 mm incl.
scraper
Punch holder for round punches with 19 mm Ø mounting thread with
Ø 30.6 to 40.5 mm incl. scraper
Die support type I for dies with Ø 3.0 to 22.5 mm, width 35 mm
Die support type II for dies with Ø 3.0 to 30.5 mm and torsion-proof dies up to
21 x 21 mm or rectangular and special shapes with max.
diagonal of 30.5 mm, width of 47 mm
Die support type IV for dies with Ø 30.6 to 40.5 mm and torsion-proof dies
up to 28 x 28 mm or rectangular and special shapes with max. diagonal of
40.0 mm, width of 60 mm
OPtiOnAL dRiVE
Special equipment
Alfra hydraulic pump AHP-S with manual switch
Optional 2-pedal foot switch
Alfra hydraulic foot pump
guARAntEE
The guarantee is valid for 12 months from the invoice date.
Any changes made by the customer to the punching unit invalidate this guarantee.
Art. no.
03171
03172
03174
03175
03176
Art. no.
03854
03866
02121
11
Publicité
