Cleaning External Parts; Cleaning The K-Cup ® Pack Holder Assembly - Keurig K-Cup K10 MINI Plus Manuel D'utilisation

SeCtIon 5

cleaning external Parts

IMPORTANT: Make sure the brewer is unplugged before cleaning.
Regular cleaning of the brewer's external components is recommended.
• Brewer external housing
• Drip Tray
• Drip Tray Plate
BReWeR
• Never immerse brewer in water or other liquids.
• Clean the external housing of the brewer and other external
components with a damp, non-abrasive, lint-free cloth.
DRiP TRAY AnD DRiP TRAY PLATe
• When the red Drip Tray Overfill Indicator appears, the Drip Tray is
almost full. Carefully remove by sliding tray toward you. Empty
contents into the sink.
• Inspect the Drip Tray periodically and clean with a damp, non-abrasive,
lint-free cloth.
Do not put the Drip Tray or the Drip Tray Plate in the dishwasher.
All manuals and user guides at all-guides.com
Cleaning & Maintenance
cleaning the K-cup
IMPORTANT: Make sure the brewer is unplugged before cleaning.
K-Cup Pack Holder Assembly parts include:
®
• Funnel
• K-Cup Pack Holder with Exit Needle
®
The K-Cup Pack Holder Assembly parts can be placed on
®
the top shelf of the dishwasher. Use a low temperature cycle
when cleaning.
To remove the K-Cup Pack
1. ®
Holder Assembly from the brewer,
lift the Handle to open. Grasp the top
of the K-Cup Pack Holder with one
®
hand. With the other hand, push up
on the bottom of the K-Cup
Holder Assembly until it releases (fig. 1).
12
Pack holder assembly
®
1
fig.
Pack
®