Ordering Parts - shark NV355C Manuel Du Propriétaire

Fig. 31
Fig. 32
4 Hose and Connections to Vacuum
• Detach the stretch hose from the back of the
portable Lift-Away
the tabs together and pulling up. (Fig. 30)
Straighten out the hose and look inside for
blockages.
• Remove the dust cup and extension wand and
separate the portable Lift-Away
from the motorized floor brush. Look in all 4
openings for any blockages. (Fig. 31)
5 Motorized Floor Brush
• Detach the hose on the motorized floor brush
at the top by squeezing the tabs together and
pulling out, and at the bottom by pulling out
the connector. Inspect inside the 3 holes.
(Fig. 32)
NV355C_26_IB_E_F_110621_2.indd 17
canister by squeezing
®
canister
®

Ordering Parts

1
2
3
4
PART
1
Pre-Motor Filter Set
2 HEPA Filter
3 Dusting Brush
& Crevice Tool
4
Turbo Brush
5
Dust-Away Hard Floor Attachment
™
6
Dust-Away Micro-fiber Pad (1)
™
7 Dust-Away Micro-fiber Pad (2)
™
To order additional parts or accessories go to
www.sharkclean.com or call 1-800-798-7398.
www.sharkclean.com
English
5
6
7
PART NO.
XFF350
XHF350
112FFJ
137FFJ
142FFJ
P200W
XPD356
17
11-06-21 3:38 PM