Ordering Parts - shark NV370 Manuel Du Propriétaire

Maintenance - cont'd
Hose and Connections to Vacuum
4
• D etach the stretch hose from the back of the
portable Lift-Away
the tabs together and pulling up. (Fig. 30)
Straighten out the hose and look inside for
blockages.
• R emove the dust cup and extension wand and
separate the portable Lift-Away
the motorized floor brush. Look in all 4 openings
for any blockages. (Fig. 31)
Motorized Floor Brush
5
(Side suction models)
• D etach the hose on the motorized floor brush
at the top by squeezing the tabs together and
pulling out, and at the bottom by pulling out the
connector. Inspect inside the 3 holes. (Fig. 32)
(Center suction models)
• T urn motorized floor brush over and detach the
hose by squeezing the tabs together and pulling
it out. Straighten out the hose and inspect the
inside for any blockages. (Fig. 33)
Fig. 33
canister by squeezing
®
canister from
®

Ordering Parts

1
2
3
4
PART
Pre-Motor Filter Set
1
HEPA Filter
2
Dusting Brush & Crevice Tool
3
Turbo Brush
4
Dust-Away Hard Floor Attachment
™
5
Dust-Away ™ Micro-fiber Pads
6
To order additional parts or accessories go to
www.sharkclean.com or call 1-800-798-7398.
www.sharkclean.com
5
6
PART NO.
XFF350
XFF350
112FFJ
119FFJC
142FFJ
XPD356
21