Ordering Parts - shark NV350WC Guide Du Propriétaire

Maintenance - cont'd
Fig. 28
Fig. 29
• Remove the dust cup and extension wand
and separate the detachable canister from the
motorized floor brush. Look in all 4 openings
for any blockages. (Fig. 28)
5
Motorized Floor Brush
• Detach the hose on the motorized floor brush
at the top by squeezing the tabs together
and pulling out, and at the bottom by pulling
out the connector. Inspect inside the 3 holes.
(Fig. 29)
16 TOLL FREE: 1-800-418-0934
NV350WC_26_IM_ENG_FRE_101117.indd 16

Ordering Parts

1
2
3
4
6
PART
1
Pre-Motor Filter Set
2 HEPA Filter
3
Dusting Brush
& Crevice Tool
4
Turbo Brush
5
Turbo Brush
6
Bare Floor Nozzle
7 24" Crevice Tool
5
7
PART NO.
XFF350
XHF350
112FFJ
1117FC
119FFJ
118FFJ
1124-FC
10-11-17 3:21 PM