Bosch Professional GCM 18V-305 GDC Notice Originale page 31

– Make sure that the depth stop (28) is pressed all the way
in and that the adjusting screw (27) fits through the re-
cess without touching the depth stop when moving the
glide arm.
– Guide the glide arm downwards until you can press the
transport safety lock (35) all the way in
– Slide the saw table extensions (8) all the way in.
– Set the bevel angle to 0° and tighten the clamping
handle (14).
– Turn the saw table (42) as far as possible to the left and
tighten the locking knob (12).
– Remove all accessories that cannot be securely fitted to
the power tool.
– If possible, transport unused saw blades in an enclosed
container.
– For transport, hold the power tool by the recessed
handles (16) on either side of the saw table.
When transporting the power tool, only use the trans-
u
port fixtures. Never carry the power tool by the pro-
tective devices, the glide arm or the handle.
Maintenance and servicing
Maintenance and Cleaning
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
The retracting blade guard must always be able to move
freely and retract automatically. It is therefore important to
keep the area around the retracting blade guard clean at all
times.
Always remove dust and chips after working by blowing out
with compressed air or using a brush.
Clean the guide roller (20) regularly.
Accessories
Dust bag
GTA 2500 W saw stand
GTA 2500 Compact saw stand
GTA 2600 saw stand
GTA 3800 saw stand
3 601 M43 000: Saw blades for wood and fibreboard,
panels and strips
Standard for Wood
305 x 2.2/1.6 x 30 mm, 40 teeth
Standard for Wood
305 x 2.2/1.6 x 30 mm, 60 teeth
Bosch Power Tools
Standard for Wood
305 x 2.2/1.6 x 30 mm, 96 teeth
Expert for Wood
305 x 2.2/1.6 x 30 mm, 42 teeth
Expert for Wood
305 x 2.2/1.6 x 30 mm, 60 teeth
Expert for Wood
305 x 2.2/1.6 x 30 mm, 96 teeth
3 601 M43 000: Saw blades for aluminium
Standard for Aluminium
305 x 2.4/1.8 x 30 mm, 96 teeth
Expert for Aluminium
305 x 2.4/1.8 x 30 mm, 96 teeth
3 601 M43 000: Saw blades for fibre-cement plates
Expert for Fibre Cement
305 x 2.2/1.6 x 30 mm, 8 teeth
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
Article number
www.bosch-pt.com/serviceaddresses
1 609 B05 010
0 601 B12 100
Transport
0 601 B12 400
The contained lithium-ion batteries are subject to the Dan-
0 601 B12 300
gerous Goods Legislation requirements. The batteries are
suitable for road-transport by the user without further re-
0 601 B24 000
strictions.
When shipping by third parties (e.g.: by air transport or for-
warding agency), special requirements on packaging and la-
2 608 837 741
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
2 608 837 742
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
English | 31
Article number
2 608 837 744
2 608 644 527
2 608 644 528
2 608 644 529
2 608 837 782
2 608 644 547
2 608 644 559
1 609 92A 6TT | (19.07.2021)