Use The Remote Control - Berger & Schroter MG982K-10M Mode D'emploi

4.3 Use the Remote Control

Arm
Laser
Disarm
Emergency
When it's in Security Mode, you can use the remote control to easily
arm (button A) or disarm (button D). Also you can dial the emergency
numbers via button C in case of emergency. Press button B can open
or close the laser (you can easily mount the camera with the help of the
laser pointer).
Button A: Arm the camera;
Button D: Disarm the camera
Button C: Emergency call button
Button B: Laser pointer
Setup status Study Code Menu Study Code
Menu
Method to add remote control(s) to the camera:
Enter the Setup status, press Menu and enter the Study Code sub-
menu. Choose "RCH," press OK button, then press button of the re-
mote control. When it's successful, there will be a
"√" before RCH.
47