Dvanced Operations; Work Mode; Settings Menu - Berger & Schroter MG982K-10M Mode D'emploi

This chapter explains the advanced operations for customizing the ca-
mera settings.

4.1 Work Mode

Setup mode: to program camera or to playback the photos or video
clips.
Hunting mode: when animal or human intrudes
into the monitoring region, the camera will take pic-
tures or videos automatically according to the pre-
vious programmed settings. After switching the
camera to ON position, the motion indication LED
(red) will blink for about 10 seconds. This time in-
terval is for you to position the camera for automa-
tic surveillance operation..
Security mode: similar to hunting mode,
but needs more power to supply. So it's
suitable for indoor use and needs to use
the power adapter. Only in security
mode you can use the remote control to
easily arm or disarm.
If the power switch is in ON position and
the Security Mode is ON, the camera will
work in Hunting Mode.

4.2 Settings Menu

Press MENU on the remote control to enter into the menu setting. The
settings menu will be shown on the LCD.
Use "L" or "M" key to select the sub-menu, use "V" key to select the
different options, use "<" to change different item page. Press "OK" to
save the settings.

4 dvanced Operations

41
Hunting mode
Security
mode