The Most Important - Austroflamm PALLAS Manuel

Masquer les pouces Voir aussi pour PALLAS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Pallas
Heating in between seasons
Heating the stove in between seasons, when the
outside temperatures are higher, the flue gases
are not able to escape completely and this may
lead to disturbances in the chimney draught,
especially if the temperatures are rising suddenly.
The stove has to be charged with less wood and
the primary air has to be increased so that the
wood can burn down faster (with visible flames)
and thus the chimney flue can stabilize.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Flat gasket 8 x 2 mm
Round hollow round gasket 6 mm
Round glas fibre gasket 14 mm
Keramott
Description
Bottom Keramott left
Bottom Keramott right
Bottom Keramott centre
Rear left, Keramott
Rear right Keramott
lateral Keramott right
lateral Kermott left
Keramoot baffle plate
Keramott wood retainer
Other parts
Description
Pallas door glass
Door Handle
BA1 spring
Stove lacquer
Stove lacquer aluminium
Wood/coal igniter
Glass cleaner ½ litre
Accessories
You can obtain floor plates of glass or steel, fireplace utensils, care products or the Heat Memory System
for heat storage from your certified dealer.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if
necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the stove annually.
6
Chimney fire
Chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel are
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have
an expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney.
Nr. drawing Part number
13
710096
14
710696
15
710338
Nr. drawing Part number
1
712766
2
712767
3
712760
4
712761-A
5
712761-B
6
712763
7
712762
8
712764
7
712765
Nr. drawing Part number
10
712759
11
712786
12
715641
--
650002
--
650003
--
640067
--
640070
4
6
1
9
order of Keramott installation acc. to numbering
english
8
5
7
2
3

Publicité

Table des Matières
loading

Table des Matières