The Most Important - Austroflamm PI-KO Manuel D'instructions

Pi-Ko
Chimney fire
A chimney fire may occur, due to sooting and
deposits in the chimney, if wrong or humid fuel is
used. Close all air inlets on the fireplace/chimney
immediately and call the fire brigade. Please have an
expert inspect your chimney for cracks and air-
tightness after the burning out of the chimney.
4. THE MOST IMPORTANT SPARES—OVERVIEW
Keramott
Description
Bottom Keramott left
Bottom Keramott right
Bottom Keramott rear
Bottom Keramott front
Rear Keramott
Side Keramott
Protection panel
Keramott baffle plate
Grate
Other parts
Description
Door
Glass
Door handle
BA 1 spring
Stove lacquer
Glass cleaner ½ litre
Gaskets
Description
Flat gasket 8 x 2 mm (1,6 m)
Round gasket 14 mm (1,7 m)
Accessories
You can obtain floor plates of glass or steel, fireplace utensils and care products.
IMPORTANT:
Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
The fireplae must not be amended.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
Cleaning
The stove, flue outlets and smoke pipes should be cleaned and inspected for deposits every year – if
necessary more often, e.g. after the cleaning of the chimney. The chimney also has to be cleaned
regularly by the chimneysweeper. Your chimneysweeper will inform you of the necessary inspection
intervals. An expert should inspect the stove annually.
6
Nr. drawing Part number
1 714690
2 714691
3 714692
4 714695
5 714693
6 714694
7 714639
8 714696
9 716408
Nr. drawing Part number
10 714658-29
11 714659
12 714466
13 714663-15
-- 650002
-- 640070
Nr. drawing Part number
14 710096
15 714223
order of Keramott installation acc. to numbering!
english