ESAB ESP-600C Manuel D'instruction page 318

section 6
6.4 testing and replacing components
notice
power semiconductor components
Categories of power semiconductors include;
• Power Rectifiers
• Modules containing the free wheeling diodes and IGBTs
• Replace a PC board only when a problem is isolated to that board.
• Always disconnect power before removing or installing a PC board.
• Do not grasp or pull on board components.
• Always place a removed board on a static free surface.
• If a PC board is found to be a problem, check with your ESAB distributor
for a replacement. Provide the distributor with the part number of the
board as well as the serial number of the power source.
• Do not attempt to repair the board yourself. Warranty will be voided if
repaired by the customer or an unauthorized repair shop.
318
troubleshootinG