Panasonic WV-CP280 Mode D'emploi page 14

How to use a vari-focal lens
The following are descriptions of how to use a 2x vari-focal lens. Method of adjustment may be
different depending on the lens in use. For further information, refer to the operating instructions
of the lens in use.
z
Loosen the zoom lock screw and slide it to the "T" end.
x
Rotate the focus ring to one step short of the "F" end.
c
Shoot an object which is located 10 m away or more, and adjust
the back focal length of the camera.
Important:
• Make sure that it is possible to focus on an object which is
located approx. 1.2 m away by rotating the focus ring when
the zoom lock screw is at the "W" end.
v
Slide the zoom lock screw to an appropriate position and tighten
it.
b
Rotate the focus ring to bring the camera into focus.
Important:
• When changing the angular field of view, adjust focus by
changing the zoom lock screw position and rotating the focus
ring again.
14
Zoom lock screw
T F
q
W N
2X
w
TV LENS
3.8~8mm 1:1.4
Focus ring
T F
W N
r
2X
t
TV LENS
3.8~8mm 1:1.4