Panasonic WV-CP280 Mode D'emploi page 10

• Simple day/night mode selector [D/N]
ON: The camera selects black-and-white
mode if the picture is dark, or color
mode if the picture is bright enough.
OFF: Color picture is displayed normally.
Default setting: OFF
Note:
• The simple day/night function is
established by utilizing the sense up
function for B/W images. The IR filter
is secured.
• Adaptive Black Stretch Selector [B.S.]
ON: The dark area of the object is auto-
matically corrected to lighten it.
OFF: Does not compensate.
Default setting: ON
Important:
• In the case of "ON" setting, noise
may be increased in the dark area of
the object.
In addition, darkness and brightness
may be emphasized in the vicinity of
the boundary between the dark and
bright areas.
• Backlight compensation selector
[BLC]
ON: Compensates the background auto-
matically if it is brighter than the
object.
OFF: This mode is used when the front of
the object is extremely bright.
Default setting: OFF
Note:
• Under conditions such as extremely
strong backlight, the desired com-
pensation
achieved even with this mode set to
ON to detect the backlight level.
• Light control mode selector [ALC/ELC]
ALC: Adjusts the lens iris automatically.
ELC:
Select this mode when a fixed iris
lens or manual iris lens is used with this
camera.
Default setting: ALC
10
effect may not
• Synchronization mode selector
[INT/LL]
Selects
mode as either internal sync mode (INT)
or line-lock mode (LL).
INT: Sets to internal 2:1 interlace
LL: Sets to line-lock mode
Default setting: INT
be
the camera synchronization