Replace The Battery - ensto ECO16BT Instructions D'installation Et De Fonctionnement

Temperature Change with Calendar, Boost and Vacation Functions
5.7. You can change the setting temperature adjusted with the adjustment knob E on the thermostat.
• The change may be either a rise or a drop in temperature.
• The blue LED indicator C is on when the temperature change is connected.
5.8. You can carry out temperature changes in different ways depending on what kind of a change is
needed.
• "Calendar" is intended for weekly reoccuring events. For example, on weekdays you can drop the tem-
perature overnight and while you are away, during weekends you may want to drop the temperature
overnight. Note! When making settings for overnight, the night must be in two sections.
• "Boost" is intended for a temporary temperature change. For example, after a shower you can raise
the temperature in the bathroom, so that the floor will dry faster.
• "Vacation" is intended for long-term changes in temperature, e.g for a weekend break or an annual
holiday.
5.9. The "Calendar", "Boost" and "Vacation" buttons are on / off buttons. When the temperature change is
activated, the "Calendar" and "Vacation" buttons are green, the "Boost" button is orange.
5.10. Press the button on home display to enter the editing mode, figure 9.
5.11. When the function "Adaptive temperature change" is active, the thermostat will advance the heating,
so that the desired temperature has been reached at the scheduled time. By default, the function is on.
Resetting the Factory Settings
5.11. Reset the factory settings, figure 10:
• Remove the adjustment knob E.
• Press the Bluetooth button D on the thermostat e.g. with a pen.
• After 7 seconds, the blue LED indicator C starts to blink quickly.
• Paired devices, consumption information and calendar settings are removed. The thermostat is in
combination mode.
6. Battery
6.1. The purpose of the battery is to maintain the time during power cuts. If the clock does not keep correct
time, the battery must be replaced. The battery change interval is several years and is usage dependent.
The battery may only be replaced by a skilled or instructed person.
Disconnect the power supply before replacing the battery.
6.2. Replace the thermostat battery, figure 11.
• Remove the adjustment knob E and the cover.
• Replace the battery with the same type of battery as the original, CR1225.
• Put the cover and the adjustment knob E in place.
• Dispose of the empty battery according to local recycling guidelines.
RAK121 / © Ensto 2018
17